BIUG Meeting 2018 09-08

01 - Rodney Crusat and his bridge saddle slot routing jig
1
 02 - Close up of Rodney’s bridge saddle slot routing jig
2
 03 - Rodney's saddle slot (L) and fretboard angle jigs
3
 04 - Tom Russell's tape trick
4
05 - Tom Russell's neck scarf joint jig for use on a chop saw
5
 06 - Tom's vertical scarf joint cutter for a tablesaw.
6
 07 - Bob Gleason prepares the router jig for his binding demo
7
 08 -Bob jig features micro adjustments for fining tuning the channel depth
8
09 - Cutting the first binding channel
9
 10 - Bob uses angle snippers to cut a binding joint
10
 11 - Bob holds a non-stick strip of Teflon as he works it between wood binding and purfling
11
 12 - One side almost finished
12
13 - All binding and purfling in place!
13
 14 - Binding glued and held in position with rubber bands
14